5724 MANTLE WITH LARGE COLLAR

 

You need: soft wool; lining, fusing, 1 hook.

 

IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,

IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.

 

SEAM ALLOWANCES: 1 cm for all seams. 3 cm for hem allowance.

 

ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (from 90 to 150 cm) to find out how much material you need (do not forget about double and symmetric details).

 

WHEN SEWING, BE CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!

 

 

CUTTING:

 

Fabric:

1. Back part – 1 piece

2. Front part – 2 pieces

3. Outer collar – 1 piece

4. Inner collar – 2 pieces

5. Front band – 2 pieces

6. Back neckline facing – 1 piece

 

Lining:

1. Back part – 1 piece

2. Front part – 2 pieces

 

NB: when cutting lining front/back pieces, do not take into account front bands/back neckline facing widths correspondingly.

 

Fusing: front bands, back neckline facing.

 

INSTRUCTIONS:

 

1. Apply the fusing to wrong side of front bands and back neckline facing.

 

2. Stitch middle edge of inner collar. Press seam allowances apart. Tack pleats into outer collar. Lay collars right sides togetherand overstitch along collar falls. Turn the collar right side out, press it.

 

3. Stitch shoulder edge.

 

4. Stitch shoulder edges of front bands and facing. Press seam allowances apart. Lay front bands on front parts right sides together, insert the collar between them and overstitch along front edging and the neckline.

Stitch shoulder edges of lining pieces excluding a hole to turn the garment right side out. Stitch the lining to front bands and to neckline facings. Overstitch lower corner. Slash rounded allowances, cut corners.

Mark garment hem and press it into wrong side. Overstitch the hem with the lining.

Turn the mantle right side out, then press it.

Sew technological hole.

 

5. Make decorative stitch along front edging and garment hem at 1 cm from the edge.

 

6. Sew a hood under right front part, sew a ring to the left one.